使用Dynamo计算Revit中的Tiles数量
制备：1.迪纳摩版本1.1.1.2140
2. 发条（迪纳摩包）
3. 饭盒（迪纳摩封装）
4 的Microsoft Excel 2013 工作流程：1.尝试提取从填充图案的曲线。您可以选择以下任一选项;
https://2.bp.blogspot.com/-ihSQZp6XiqQ/V6RFDCmfrrI/AAAAAAAAEEM/XJ9Deby_0agFrJWYss_XHDl4khYdWYMlgCEw/s640/01.PNG
选项1。选择“模型线”，然后选择“拾取线”
https://4.bp.blogspot.com/-gkQ_5R1mCAk/V6RFZ2jzBXI/AAAAAAAAEEk/cDaRHDLMzEQmbyEhMmBSoTsfr8mjEfwUACEw/s640/02.png
选项2。将2D视图导出为CAD格式（DWG），然后将CAD（DWG）文件导出到Revit （我的首选选项）
https://3.bp.blogspot.com/-qb70usTMKGU/V6RFhLiwPwI/AAAAAAAAEEU/jT1Q7Ud3dwwpqMiD1VWG31HCPPDqeOQiQCLcB/s640/03.png
https://4.bp.blogspot.com/-pnySrqbC36w/V6ROFgJGcyI/AAAAAAAAEFI/pDZEq0--LhsK2lsotWPmXRxR0NP-YXjRwCLcB/s640/06.png
2. 使用上面提到的任一选项从填充模式中提取这些曲线后。是时候推出Dynamo了。3.在Dynamo中，使用以下“选择模型元素”节点选择步骤1中提到的那些曲线。注意：下图仅能够选择模型线。对于Link CAD（DWG）文件，您必须从链接文件中提取这些曲线。（如果您不知道如何从Linked文件中提取这些曲线，您可以在下面的评论部分发表评论/ email：lingkonn@gmail.com）
https://2.bp.blogspot.com/-BbXenCf4K-Y/V6RTAt3lz0I/AAAAAAAAEFg/mE0jztPrTdwRKHxd6d2SlAVDgcebf1bpwCEw/s640/07.PNG
4. 使用“选择模型元素”节点选择要提取瓷砖数量的地板/墙。
https://2.bp.blogspot.com/-CC--LivkQos/V6RTAk0JWUI/AAAAAAAAEFk/KsWpXtVWAu0gGEF88yeHz0bz7fm5qYPEwCEw/s640/08.png
5.对于其余步骤，请按照视频进行操作;
整个图表
https://1.bp.blogspot.com/-Ptn7pOYrJW0/V6RU17rZuoI/AAAAAAAAEFw/XPx2KC1_niIE4Dmord72rArNd1w4_RgFACLcB/s640/Graph.png
1. Dynamo Version 1.1.1.2140
2. Clockwork (Dynamo Package)
3. LunchBox (Dynamo Package)
4. Microsoft Excel 2013
WORKFLOW:
1.Try to extract those curves from Fill pattern. You can choose either one option as stated bellow;
https://2.bp.blogspot.com/-ihSQZp6XiqQ/V6RFDCmfrrI/AAAAAAAAEEM/XJ9Deby_0agFrJWYss_XHDl4khYdWYMlgCEw/s640/01.PNG
Option 1.Select the Model Line and then Choose Pick Lines
https://4.bp.blogspot.com/-gkQ_5R1mCAk/V6RFZ2jzBXI/AAAAAAAAEEk/cDaRHDLMzEQmbyEhMmBSoTsfr8mjEfwUACEw/s640/02.png
Option 2.Export a 2D view to CAD format (DWG) and then Link CAD (DWG) file to Revit (my preferred option)
https://3.bp.blogspot.com/-qb70usTMKGU/V6RFhLiwPwI/AAAAAAAAEEU/jT1Q7Ud3dwwpqMiD1VWG31HCPPDqeOQiQCLcB/s640/03.png
https://4.bp.blogspot.com/-pnySrqbC36w/V6ROFgJGcyI/AAAAAAAAEFI/pDZEq0--LhsK2lsotWPmXRxR0NP-YXjRwCLcB/s640/06.png
2. Once you have extracted those curves from Fill pattern using either one Option mentioned above. It’s time to launch Dynamo.
3. In Dynamo use the following “Select Model Elements” Node for select those curves mentioned at Step 1.
Note: The following graph only able to select Model Lines. For the Link CAD (DWG) file you have to extract those curves from Linked file. (If you don’t know how to extract those curves from Linked file you can leave comments at the comment section below / email: lingkonn@gmail.com)
https://2.bp.blogspot.com/-BbXenCf4K-Y/V6RTAt3lz0I/AAAAAAAAEFg/mE0jztPrTdwRKHxd6d2SlAVDgcebf1bpwCEw/s640/07.PNG
4. Use “Select Model Element” Node for select floor/ wall which you want to extract Tiles quantity.
https://2.bp.blogspot.com/-CC--LivkQos/V6RTAk0JWUI/AAAAAAAAEFk/KsWpXtVWAu0gGEF88yeHz0bz7fm5qYPEwCEw/s640/08.png
5.For the remaining steps please follow along with the Video;
Entire Graph
https://1.bp.blogspot.com/-Ptn7pOYrJW0/V6RU17rZuoI/AAAAAAAAEFw/XPx2KC1_niIE4Dmord72rArNd1w4_RgFACLcB/s640/Graph.png
页:
[1]