|
原名称:Design the family music studio
位置:其它
分类:办公空间
内容:实景照片
标签:办公空间实景照片工作室空间的位置与你需要在多大程度上将其与房子的剩余部分隔绝密切相关。让听力与录音空间与街道,邻居甚至是机械设备发出的外部噪音隔绝是一件非常重要的事情。所以室内,较低等级的,没有窗户的位置会使一个很好的起点,但真正的录音工作室是如此的细致入微以至于从开始你就需要一个经验丰富的专业人员介入,以确保你的目标能实现。计划的下一步就是定义空间的实际比例。
反射。在一个空间内硬面会反射且分散声音能量,软面则吸收声音能量。大多数当代建筑用粗硬线条和表面定义,比如混凝土,硬木和干。吸收。为减少空间内的声音能量,我们采用吸收声音的方法。地毯、窗帘、沙发以及墙壁挂饰都可以帮助吸收声音,特别是较高频率的声音,这些声音通常被认为是令人不快的声音。房间内声音的吸收可以控制混响并减少环境噪音。对于一个没有很多家具或窗帘,但却有很多硬表面的房间,可以使用特殊的声音吸收器(泡沫,吸声灰膏)减弱房间内的声音。
传输和隔离。为了与你的邻居搞好关系,你需要关注如何隔离声音。因为声音靠振动传播,因此最小化空间内的声音传输则是一件有意义的事。我们必须将它们的接触点降至最低。在标准墙体建筑中,典型的墙壁分隔空间共享框架结构-立柱。为了实实在在地从听觉上隔离一个空间,你需要保持每个空间的周边框架各自独立于毗邻的空间以及周围的结构。这也包括地板和天花板。
译者:筑龙网 蝈蝈
The location of the studio space will greatly affect the degree to which you’ll need to isolate it from the rest of your home. Isolating listening and recording spaces from outside noises — coming from the street, your neighbors and even mechanical equipment — is a high priority. So is the actual size of the recording equipment. So interior, lower-level, windowless locations are good starting points, but true recording studios are so nuanced that an experienced professional should be involved from the outset to be sure your goals are being met.The next part of planning is defining the actual proportions of the space.
Reflection. Hard surfaces reflect and disperse the sound energy in a space; soft surfaces absorb it. Much of contemporary architecture is defined by hard lines and surfaces, like concrete, hardwood and drywall.
Absorption. To reduce the sound energy in a space, we use absorption. Rugs, drapery, couches and wall hangings all help to absorb sound, especially at higher frequencies, which are usually perceived as unpleasant. Absorption in a room controls reverberation and reduces ambient noise. In spaces without a lot of furniture or drapes and many hard surfaces, special acoustic absorbers (foam, acoustical plaster) can be used to deaden a room.
Transmission and isolation. To keep the peace with your neighbors, you’ll need to focus on isolation. Because sound is transmitted by vibration, it makes sense that to minimize sound transfer between spaces, we should minimize their points of contact. In standard wall construction, walls that separate spaces typically share framing members — the studs. To truly isolate a space acoustically, you want to keep the perimeter framing of each space independent from the adjacent spaces as well as from the surrounding structure. This includes the floor and ceiling.
|
|